??BUILT TO LAST – Our pair of coil strut removers boasts high durability and corrosion resistance under even punishing use thanks to their heat-treated carbon steel construction, black oxide finish along the threaded rods, and galvanized end pieces. Durable materials provide coil spring shock installer long service lifetime, suitable for both professional mechanic and beginner use.
??IDEAL FOR MOST CARS – The heavy duty strut spring compressor is wide compatible with struts suspension that remove from the vehicle to transfer the old spring on the new mounting, hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11.5-inch threaded rods for 10 to 10.5-inches maximum opening to fit jaws to coils.
??EASY AND SAFE OPERATION – The broad spring contact and built-in detent pins lock the spring coil in place for safty and convenience operation when replacing strut assembly and springs. Attach the brackets completely onto the spring, tighten and remove the strut, also use to repairs on bent struts, strut tubes, and damaged pieces. Threaded rod allows for durable and smooth compression of springs with hand or power tools.
??IMPORTANT NOTE – When doing coil strut assembly maintenance always make sure all the tools are correctly used and wear safety glasses and gloves. Lubricate threads with anti-seize compound for prolonged life.
??100% SALE SUPPORT – We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!
??About 11.5in Strut Spring Compressor Tool Kit
??A Must Have Tool: struts are the most important element of the suspension system in many modern vehicles, and should be replaced, on average, every 50,000 to 80,000 miles
Thorstone’s tool kit provides you a versatile compressor solution, large surface area for broad spring contact help replace shock absorbers, spring sets, repair bent struts and damaged spindles safely and easily.
Constructed with forged hooks and hardened center screws for maximum durability and strength, ideal for professional mechanic and repair novice
?Note
a. Lubricate threads with anti-seize compound for prolonged life
b. DO NOT
use an air tool or impact wrench, improper usage may damage the bolt c. Compressed the spring evenly and ensure the tool not slip or move around on the coils,and avoid using an air tool or impact wrench, improper use may cause damage.
?Instructions
1. lubricate both main shafts with oil.
2. Align the hooks with the safety pins backed off so the hooks will fit over the spring.
3. Position both set of hooks 180?? a part, opposite each other.
4. Push safety pins in the lock position on hooks.
5. Using a 3/4″or 19mm socket and ratchet turn the main shaft compressing the strut spring enough to safely remove the fastener nut holding the cartridge.